Sundstrand Series 20 MDC Control
October 10, 2022 Comments Off on Sundstrand Series 20 MDC ControlFor the up to date series 20 MDC, the trepan groove has been taken out from around the servo ports on
Read moreFor the up to date series 20 MDC, the trepan groove has been taken out from around the servo ports on
Read morePut the in alignment with the valve block mounting area while it is in the up position. Turn the shaft
Read moreIf you need further help with this unit, call us at 800-361-0068 or sales@htsrepair.com
Read moreVariable displacement with auxiliary package Put the unit that has the shaft in a flush area and the
Read moreVariable Displacement With Auxiliary Package When you put in a new mechanical shaft seal that it fits
Read morePut the stator on the wear plate so that the seal ring is down and in it’s place (62). Make sure
Read moreIn these instructions the charge pump is for a left hand. As with most parts that are right and left
Read moreTake out the track chain. The sprocket shield and track guide need to come off. Take a 10 ton jack and
Read more