• Manifolds & Bases
    Manifolds & Bases
    Comments Off on Manifolds & Bases

    Manifolds have a station that consists of pair of end plates that lets in/out of air that goes to the end plate and the cylinder ports go thru the bottom. A pilot signal can be provided from the bottom or side. On the valve interface thru ISO compliance. You can get the manifold put together…

    Read more
  • Valves, Control Valves & Solenoids
    Valves, Control Valves & Solenoids
    Comments Off on Valves, Control Valves & Solenoids

    If you need further assistance with these valves or any others, call us at 800-361-0068 sales@htsrepair.com

    Read more
  • Mini Pressure Relief Valves
    Mini Pressure Relief Valves
    Comments Off on Mini Pressure Relief Valves

    These relief valves eliminate any harm to your moving parts that had air pressure build up. When it gets like that, it will let air out invariable by itself when it reaches a set point. Some characteristics are that it has three pressure settings, responsive diaphragm actuation, small in size, plastic adjustment knobs that don’t…

    Read more
  • Series CPOM Polot Valve Check
    Series CPOM Polot Valve Check
    Comments Off on Series CPOM Polot Valve Check

    Needs to be on a flat area and come as close to .0003″ and ** means in inches. Highest working pressure 3000 PSI for CPOM3/6 4500 PSI for CPOM2 Usual Flow CPOM2 – 7GPM CPOM3 – 12GPM CPOM6 – 50GPM Cracking Pressure – 5 PSI The curves on the chart were made by 100 SSU…

    Read more
  • Series UR Control Valves
    Series UR Control Valves
    Comments Off on Series UR Control Valves

    Least pressure settings – 30 gpm flow, 150 SSU and oil temp pressure 100 degrees F. If any of these conditions are off, it will not work properly. The max working pressure is 3000 PSi. Drain – 10 PSI and normal flow is .3 gpm. Drain line has to be right on the back that…

    Read more
  • Parker FG3PKC Flow Control Valve
    Parker FG3PKC Flow Control Valve
    Comments Off on Parker FG3PKC Flow Control Valve

    If you need further help with any kind on control valve, give us a call at 800-361-0068 sales@htsrepair.com

    Read more
  • Pneumatic & Automatic Valves
    Pneumatic & Automatic Valves
    Comments Off on Pneumatic & Automatic Valves

    Safety Valves – this valve is a dual valve made to give comparable flow formation. There are three different kinds of these valve: XSE – which is a type of monitoring that lets pneumatic pressure balancing that has an electrical interlock. Next you have XS – the monitoring on this has non contacting sensors that…

    Read more
  • Parker D31VW Hydraulic Valves – General Information
    Parker D31VW Hydraulic Valves – General Information
    Comments Off on Parker D31VW Hydraulic Valves – General Information

    Valve w/manaplug plug in (6) Valve w/topside plugin & signal lights (570) For further information on these types of valves, call us at 800-361-0068 sales@htsrepair.com

    Read more
  • Foot Mounted Valves
    Foot Mounted Valves
    Comments Off on Foot Mounted Valves

    Air on all these valve is 250 PSI Hydraulics on all these valves is 2000 PSI. If you need to know more about different mounting, valves or other controls, call us at 800-361-0068 sales@htsrepair.com

    Read more
  • Valve Drive for an EHD1
    Valve Drive for an EHD1
    Comments Off on Valve Drive for an EHD1

    This will give you selections for shutting of the power to the solenoids to avoid errors. It has a fault detection that visually displays the workings of the LVDT signal it puts out and its importance of the error signal in order to correct the problem. And it will stay lit up til the problem…

    Read more

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top