If we can assist you further with your Dynapower unit, give us a call at 800-361-0068 We can help you by answering questions or repairing your unit. sales@htsrepair.com
Read moreVariable Displacement With Auxiliary Package Call us today with any questions or if we can help repair your unit. 800-361-0068 sales@htsrepair.com
Read moreCall us at 800-361-0068 sales@htsrepair.com
Read moreSpecial Tools A. * 1.5 in from shaft with splined drive for b pad charge pump. The material is c.r.s. and harderns to rc 50-55. B. The material on this is SAE 1074, Spring Steel 16 ga. x .75 wide C. 5/16 18 UNC Cap Screw – 2 needed. Take out the head and grind…
Read moreOn A. the transmissions that have sealed bearings need an oil seal under the output bearing. When plausible put in the oil seal in the body so the rubber lip is facing toward the counter bore in the body. Push the seal in the bottom locale in the counter bore. Try not to push to…
Read moreFor the up to date series 20 MDC, the trepan groove has been taken out from around the servo ports on the control. You will need to put in two washers in the servo ports. They are in the kit. Put the orings in the servo port holes. Put in the washers in the center…
Read moreLet us know if we can assist you with this unit by calling us at 800-361-0068 sales@htsrepair.com
Read moreFor further help with this, call us at 800-361-0068 sales@htsrepair.com
Read moreIf we can assist you with this series or any series on Sundstrand models, let us know by calling 800-361-0068 sales@htsrepair.com
Read moreThis is part one of this blog. If you have any questions on this, call us at 800-361-0068 sales@htsrepair.com
Read more
