Sundstrand Series 90/130 Hydraulic Pump – Changes to the MDC Control & Integral Filtration Manifold

Sundstrand Series 90/130 Hydraulic Pump – Changes to the MDC Control & Integral Filtration Manifold

Comments Off on Sundstrand Series 90/130 Hydraulic Pump – Changes to the MDC Control & Integral Filtration Manifold
This has a bulkhead nut that has been changed, but the old one will work with the older or newer manifold. The new bulkhead nut can only on the new style. The bulkhead nut will be available for service parts, but the older manifold itself will no longer be available. The chart shows which units are affected by this change. If you see a black square it means it is interchangeable.

These changes are made so it could fit the international customer as well. The change is that the manifold that is hooked to the front of the MDC housing can accommodate the customer’s unit overseas. The overseas solenoid valve has to have a thicker manifold to help with the clearance for the solenoid and front the MDC housing. The newer model manifold will stick out closer to the mounting flange of the pump. This will reduce the sizes by .2 inches. The new model has to have longer screws, but will fit units in the US and Overseas customers units.The older manifold will no longer be available. Look at the chart to see which units are affected by the change.

Let us know if we can assist you with this unit by calling us at 800-361-0068

sales@htsrepair.com

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top