To put the seal, put in two spacers on the two screws and put in thru the balance plate and servo stem.
Read moreIf we can assist you further with your Dynapower unit, give us a call at 800-361-0068 We can help you
Read moreFor further help with this, call us at 800-361-0068 sales@htsrepair.com
Read moreFixed displacement motor is made for hydrostatic drives in open/closed loop circuits. Out speed is right
Read moreWhen the rocker cam comes in practice to help with the pump displacement that gives a smaller size, helps
Read moreStart Up Procedure Turn on the prime mover and let the pump get to idling speed (750 RPM for about 5
Read moreTighten up bolts in increments. Before you put together, put some kind of grease on face of rotor. The
Read moreThe seals need to be totally wet when you put this together with the right fluid. And put the shaft seal
Read morePorts B Outlet port, SAE flange SAE J518 3/4 in Fixing thread ISO 68 3/8 16 UNC 2B .75 deep 31 lb ft
Read more
