Rexroth Size 80 SAE Model Sizes

Rexroth Size 80 SAE Model Sizes

Comments Off on Rexroth Size 80 SAE Model Sizes

Ports

A,B Service line port – high pressure series SAE, J518 – 1 in. Threading fitting a/b ISO 68 – 7/16 in – 14 UNC-2b 0.87 (22) deep 265 lb ft T1 Leakage oil port ISO 11926 – 1 1/16 in .079 (20) deep140 nm T2 Leakage fluid – oil drain ISO 11926 – 1 1/16 in 12 UNF-2b 0.51 (13) deep 60 lb ft X Pilot pressure port ISO 11926 – 9/16 in 18 UNF-2b 0.51 (13) deep 60 lb ft G Port for synchronous control of several ISO 11926 – 9/16 in 18 UNF – 2b 0.51 (13) deep 60 lb ft units & remote charge pressure G2 Port for second pressure setting ISO 11926 – 9/16 in 18 UNF – 2b 0.51 (13) deep 60 lb ft U Flow port ISO 11926 – 7/8 in 14 UNF – 2b 0.67 (17) deep 180 lb ft M1 Measuring port for charge pressure ISO 11926 – 9/16 18 UNF – 2b 0.51 (13) deep 60 lb ft

When you tighten up, put no pressure on it than max 3

Shaft Ends
(left side): Service Line Port A/B at side opposite 52 (right side) Service line port A/B at rear 51

Call us with any questions on these types of controls

800-361-0068

sales@htsrepair.com

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top