John Deere Crawler 755B – Planetary Housing Part 2

Next clean counter bore (A).

Put on the plastic gasket to the counter bore.

Put in the pinion shaft (B) in the housing to bottom of the counter bore.

Lastly put in the dowel (C) in the housing to bottom of the counter bore.

No. 2

Put in the thrust washer (D) and pinion (C) on the shaft (A),

Put in rollers (B) between the pinion & shaft.

A – shaft

B – Roller

C – Pinion

D – Washer

No. 3

Next clean cap screws holes (A) inside the housing and the threads.

Put in the gasket to match up with the cap screw holes.

Next goes in the washer (D) and put the cover over the pinions.

All that is left is tighten up the screws.

No. 4

If you need further assistance with topic, call us at 800-361-0068

sales@hydrostatic-transmission.com