February 2, 2023Comments Off on SAE Mounting Flanges
DMIC Port Flange & Hardware Kits Flanges come two different ways: Standard and Companion A standard flange hooks up to a component that has an o ring groove and thru bolt holes. Companion flanges have threaded holes and a flat pad that will help to hook up to a standard flange. These types of flanges can hold up to the task of 10,000 PSI. On the small chart tells about the bolt kits you can get for the flange you are needing.This is a split flange. These types of flanges hook up the SAE flange to a 4 bolt flange. Always when installing parts to make sure they are thoroughly cleaned. Make sure to put some type of grease on the orings. And tighten bolts a continuing clockwise manner til they are all tighten. This is a chart for the Captive flange. They are on the same level as split flanges. They are used in the place of putting a SAE flange head. Sometimes split flange may fail and a captive style flange is used. Always when installing parts to make sure they are thoroughly cleaned. Make sure to put some type of grease on the orings. And tighten bolts a continuing clockwise manner til they are all tighten. This is a threaded port flangestainl that have the oring groove that will hook up to the companion flange that have the four bolt, but have to be the same size. This chart shows the threaded reducing flange. It doesn’t have a need for a bushing if your port system is reduced. This is a threaded 90 degree elbow flange, that will hook up to any companion flange. This chart shows a blank unported flange. This type of flange has an o ring groove that gives you endless flexibility for all different kinds of processes. These are good to mount transducers and pressure measurement units. This is a socket weld flange for a pipe and tube. It has a deep socket sleeve that will lead the tube into place so that they can weld it. Pipe length can be adjusted. This is a chart of a stainless steel flange, but you have to let them know because this is a special request. And their are filters for filtration for working pressure and cartridges that go with your system. There are also dual can filters too.
This is a socket weld 90 degrees elbow flange that you can get in stainless steel, that is for pipe and steel. Piping can be adjusted for the length.
Needing mounting flanges for different types of pumps. Call we can certainly help you with that.
