This unit give you flow adjustments that go up to 15 GPM. It is a manual control where recurring flow changes are needed. This compensator has a repetitive output flow whatever pressure changes go thru at the work port.

When you adjust the knob will give you different flow rates from the work port. After you get it like you need, the inlet flow goes thru the excess flow port and goes back in the tank. Make a note that the excess flow port is not considered a work port.

You can overturn the flow work port, but remember it is not pressure compensated. This model don’t have a relief valve that is made into it.

Some features of this unit are, has a shifting type spool, cross drilled and give spot on metering.

If you need more info on this valve call 800-361-0068

sales@htsrepair.com