Sundstrand Sauer Danfoss Hydraulic Series 90 – Changes in Pulsating Sensor

Sundstrand Sauer Danfoss Hydraulic Series 90 – Changes in Pulsating Sensor

Sundstrand Sauer Danfoss Hydraulic Series 90 – Changes in Pulsating Sensor

Comments Off on Sundstrand Sauer Danfoss Hydraulic Series 90 – Changes in Pulsating Sensor

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic Parts
Today we will discuss:

Sundstrand Sauer Danfoss Series 90 – Pulse Sensing Change

Some of the pulse pick ups that are on the pumps and motors between June 1992 and April 1994 were found to be defective. They were corrosion on the internal circultry.
The corrosion of the internal circultry can have intermittent operation or partial loss of signal and eventual failure.
The picture shows what an installation looks like of the silver color of the potentially defective pulse pick up body. It needs to be replaced with a pulse pick up body that is black in color.
Electrical closed loop feed back circuit, if you have a speed sensor, that is used with a microprocessor, the sliver colored speed sensor need to be replaced even if it has the special hardware features code.

If you need more info on this subject, please let us know.
You can call us at 800-361-0068
Email: sales@hydrostatic-transmission.com

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top