Eaton Series 76 Hydraulic Controls – Destroke & Anti Stall Control

Eaton Series 76 Hydraulic Controls – Destroke & Anti Stall Control

Eaton Series 76 Hydraulic Controls – Destroke & Anti Stall Control

Comments Off on Eaton Series 76 Hydraulic Controls – Destroke & Anti Stall Control

Eaton Series 76 Hydraulic Controls – Destroke & Anti Stall Control

This control is a solenoid valve that is put on a regular variable pump control. When it is stimulated, the valve cross ports control pressure lets the centering springs to get the pump out of stroke. It can be vamped up with a single switch, push button or dead man’s switch. This unit comes in 12 volt or 24 volt DC & will open and close with certain configurations.

The solenoid is made to convert a variable pump control into a destroke control.

The anti stall unit is made to drive a normal closed destroke valve. The circuit will closely watch the engine speed. If the speeds drops the anti stall will reduce the pump’s displacement.

To learn more about these types of controls, call us at 800-361-0068

sales@hydrostatic-transmission.com

 

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top