Oil Cooler Instructions
Oil Cooler Cleaning Instructions
Oil Cooler Model: ______________________ Serial Number _______________________
Ø The hydraulic-hydrostatic oil cooler must be removed from the machine and taken to a company that can adequately clean and core it out, preferably a certified radiator shop.
Ø The oil cooler must be placed in vat and cored out, do not place in acid vat as fins are made of aluminum.
Ø After removing from vat, use cheese cloth on the bottom output and force naptha or diesel from the top down with force to check again for any debris.
Ø Shake unit, if any rattling at all, purchase a new oil cooler
Ø A copy of these signed instructions and customers receipt must be forwarded to our company so that we can put it on file.
Ø IMPORTANT: High pressure hosing and/or flushing does not qualify for warranty procedure.
*** IF OIL COOLER CANNOT BE 100% FREE OF DEBRIS IT MUST BE REPLACED ***
In detail describe how you cleaned the oil cooler, what material, equipment and cleaners were used. ______________________________________________________________________________
I, the undersigned, certify that the herein referenced oil cooler cleaning instructions were performed by me, a certified technician, at my place of business, a certified radiator shop. I also certify that this oil cooler is 100% free of debris.
Title Street Address
_______________________________________ ____________________________________ Phone Phone
________________________ _______________ ___
This is filled out to keep in your file. Oil Cleaning instructions are very critical for your unit. To keep out all the dust, dirt and contamination from your new unit when it is installed.
This too could void your warranty if they are not done to HTS’s standards.