Hydraulic Circuitry

Hydraulic Circuitry

Hydraulic Circuitry

Comments Off on Hydraulic Circuitry

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic Parts
today we will discuss:

Hydraulic Circuitry – Feed Type Circuit

It is at this point in the circuitry, that the cam connected to the cylinder actuates the deceleration valve. As the cam depresses the plunger, flow the the valve is gradually cut off. This valve allows a load attached to the cylinder rod to be slowed down at any point of its stroke, where cylinder cushions are not in effect. Fort the remainder of the stroke, oil leaving the head end will pass the the flow control valve (set at the necessary feed rate) thru the directional control and back to tank. It should be noted that the relief valve has opened because flow control has now become apparent to the circuitry.


If you would like to comment on this or any topic we discuss, please feel free to do so. We like getting a discussion going.

Call us at 800-361-0068

Our email is sales@hydrostatic-transmission.com


About the author:

Quick Links


Social Links

Contact Information

    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top