Power & Control Valves

Power & Control Valves

Comments Off on Power & Control Valves
These poppets are oil resistant and the Buna seal is there permanently.

This poppet shows the injection molding with a polyurethane u cup lip seal and you dont need to use any time of lubricant with it.

These poppet valves are anodized so that will not crack or peel and no lubricants are needed. Corrosion free,

This has a tapered floating poppet spool and seal. It will self center and self cleaning.
A. This is a mechanically working valve that has a 1/4″ line mount. B. This is a working direct solenoid that has a 4 way base mount valve for 1/4, 3/8 and 1/2 inch. C. Solenoid that works 4 way that mounts on the base of the valve for 1/4 and 3/4 inch. D. A working 4 way solenoid that is usually meant for base mounted valves also for 1/2 thru 1 1/2 inch. E. These are air pilot working 4 way valves for 1/4 thru 1 1/2 inch. F. Working solenoid 3 way valves that are base mounted for 1/4 thru 1 1/2 inch. G. This is a stacking end port that is a manifold that is base mounted for 1/4 thru 3/8 inch. H. This is a bottom port that stacks on a base mounted manifold for 1/4 thru 1 1/4 inch. I. This is a bottom port for stacking manifolds for automotive for 1/4 thru 1 1/4 inch.

You can use these valves either wet, dry, oil, water or air. They are tapered poppet with short strokes with high flow.

If you need more info on these types of valves, call us at 800-361-0068 or email us at


About the author:

Quick Links


Social Links

Contact Information

    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top