Parker M3 Series General Information

Parker M3 Series General Information

Parker M3 Series General Information

December 13, 2022 Comments Off

Fan drives produce high speed and more cooling volume. The fan goes right on the shaft.

Swing drives give a torque that is smooth and gives the best control for speed.

Vibratory drives have the scope to help with the relief valve.

Winch Drives gives off even output torque for the speed volume and better control for operations.

On the speed range – the lest speeds are placed on stable loads. If the speed is higher you will need to call the factory about that.

The drain port will be a SAE ported motor. 1/4″ -19 BSPP for ported motor. There is a #6 SAE plug in the internal drain port. When you order a new unit, the plugs are on the motor. Inlet port location – the shaft goes in the direction of the arrowhead on port A in the pressure port. On port B the inlet port the shaft goes in the direction of the arrowhead.

Included are stamped plates for these units. You will see a slot that can handle a hook or rod that is .50 inches dia. The plates are made to bend so you can kind of get them out of the way or straighten them back out with the unit is installed or uninstalled.

If you have any questions about this series of Parker pumps or another model, give us a call at 800-361-0068

sales@htsrepair.com

About the author:

Susan Richardson