Racine PSV 40 Variable Volum Pump

Racine PSV 40 Variable Volum Pump

Comments Off on Racine PSV 40 Variable Volum Pump

2000 PSI

The flange is mounted in the RH rotation with a medium keyed shaft

A. This is a RH rotation mounting flange. B. To know the length of teh pump mounting flange to the middle of the port, go up by 3/8″ Port changes Dash 50/Dash 60 C. If you have a 40/80/100 models the different in the trailing pump is the amount of holes for the adapter

You coupling arrangement is a wet design, the main pump doesn’t have a back shaft seal. The adapter will fill up with fluid and help it to cool your coupling.

When you trailing pump goes over 65lbs you will need to use the trailing pump on the bottom right. And you will need to put in the rolling pins before you put it together.

On the seal kits…Viton seals Single end shaft and combination #723731….double end shaft #794117 The kits have 2 bearings, one rotor, one set of vanes, one pressure ring, 4 roll ins, 1or 2 keys, one seal kit adn two port plates

You have to buy the 1st and 2nd stages together.

This is a RH rotation.

If you need further assistance with this unit or any other Racine products, call us at 800-361-0068


About the author:

Quick Links


Social Links

Contact Information

    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top