Sundstrand Sauer Danfoss Series 40 Auxiliary Pad

Sundstrand Sauer Danfoss Series 40 Auxiliary Pad

Sundstrand Sauer Danfoss Series 40 Auxiliary Pad

Comments Off on Sundstrand Sauer Danfoss Series 40 Auxiliary Pad

Sundstrand Sauer Danfoss Series 40 Auxiliary Pad

 

The auxiliary pad is used under the case pressure, you will need an oring to seal the auxiliary pump mounting flange to the pad. The drive coupling is greased by by oil from the main pump case.

All the mounting pad standards are met by SAE specs.

The pad shaft torque and  main pump torque doesn’t need to go over the highest level of pump input shaft rating that is on the chart.

Torque values can be a 58 flc shaft spline hardness on mating pump shafts. Spline tooth wear is based of a continuous torque specs.

Procedures that have a worse than normal vibrating or high “G” loading can need an extra structional support. You don’t want leaks and damage your mounting flange.

And you can refer to the chart for additional info.

We can answer an other questions you may have, by calling or emailing us.

800-361-0068

sales@hydrostatic-transmission.com

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top