Denison Barrel & Auxiliary Shaft Assy

To assemble these parts you will need to:

Put the barrel in such a position that the bores are facing down on a uncontaminated surface.

Put in the holddown spring into the barrel counterbore.

Place the spring retainer into the counterbore and make sure it is flush against the  spacer spring.

Put in the retaining ring in the barrel counterbore groove, making sure the it completely sealed in the groove.

Place the barrel stop over the auxiliary drive shaft. Then turn the barrel on its side and put in the auxiliary drive shaft and barrel stop thru the barrel spring and hold down spring.

If you need further assistance with this shaft, call us at

800-361-0068

email us at sales@hydrostatic-transmission.com

Below is the parts list for this auxiliary shaft: