Sundstrand Sauer Danfoss Series 40 – Case Pressure & Speed Limits

Sundstrand Sauer Danfoss Series 40 – Case Pressure & Speed Limits

Sundstrand Sauer Danfoss Series 40 – Case Pressure & Speed Limits

Comments Off on Sundstrand Sauer Danfoss Series 40 – Case Pressure & Speed Limits

Sundstrand Sauer Danfoss Series 40 – Case Pressure & Speed Limits

 

The case pressure cannot out do the continuous case pressure. If it exceeds the continuous case pressure it will operate under cold start conditions. If you run it this way, it will have external leakage that affects the seals, gaskets and the housing. See the diagram.

 

The speed limits that is being advised at full power conditions at it’s highest value.¬† If you go the maximum speed rated, life of the unit may fail and the drive line power may go out. And you must be able to have braking capabilities¬† in order to stop and hold the unit in case the drive line power does go out. See Diagram.

 

If you need further help with this, please call 800-361-0068

sales@hydrostatic-transmission.com

 

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top