Linear Motion Controllers

Linear Motion Controllers

Linear Motion Controllers

Comments Off on Linear Motion Controllers

Linear Motion Controllers

When you add these controllers with a cylinder it forms a system that has positioning sensing and controlling. Even thou they may be small in size it can operate this linear control with ease and they are easy to put into operation.

Most standard units come with single turn, set point potentiometers. You can also get it with multi turn potentiometers. Standards outputs are -10 to +10 VDC, 0 to +10 VDC and 4 to 20 mA.  Options on this include AC and DC power. You can scale the output on these models so that you can set the offset and span boundaries, while the linear goes between both points.

On the chart below shows how to read the codes for this unit, by entering the two digit code from the tables that meet your input and output recommendations.

If you have any further questions on this, call us at




About the author:

Quick Links


Social Links

Contact Information

    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899

Back to Top