• Rexroth Timing Volumes
    Rexroth Timing Volumes
    Comments Off on Rexroth Timing Volumes

    Rexroth Timing Volumes Rexroth offers different varieties  of timing volumes. They rate at 200 PSI max working pressure with a 5 to 1 safety factor. The chart and diagrams provide you with a wide array of information. If further info is required, contact us at 800-361-0068 or email us at sales@hydrostatic-transmission.com  

    Read more
  • Sundstrand Sauer Danfoss Hydro Transmission EDC Anti Stall Control
    Sundstrand Sauer Danfoss Hydro Transmission EDC Anti Stall Control
    Comments Off on Sundstrand Sauer Danfoss Hydro Transmission EDC Anti Stall Control

    Sundstrand Sauer Danfoss Hydro Transmission EDC Anti Stall Control The EDC on the  pump controls the displacement. The electrical control handle that is between the load control and the EDC manual control pump displacement.  When the engine speed drops below the governed setting, the pump displacement is evenally reduced from the manual command valve to…

    Read more
  • Explanation and Suffixes for Precision Bearings
    Explanation and Suffixes for Precision Bearings
    Comments Off on Explanation and Suffixes for Precision Bearings

    Internal Bearing Clearances A bearing clearance is the amount a bearing ring moves in relation to the other under a give small measuring load in a radial direction or in an axial direction. For radial bearings, the radial clearance is of primary importance. The radial clearance in ball bearings should be close to zero when…

    Read more
  • Sundstrand Sauer Danfoss Series 15 Charge Pump All Types
    Sundstrand Sauer Danfoss Series 15 Charge Pump All Types
    Comments Off on Sundstrand Sauer Danfoss Series 15 Charge Pump All Types

    When you are first taking out your charge pump, make marks on the housing to let you know how to it goes back when reassembling it. You will need to clean the shaft off. Make sure to get all burrs and any contaminate residue off, so the shaft seal seal can do its job. To…

    Read more
  • How Gerotors Work
    How Gerotors Work
    Comments Off on How Gerotors Work

    How a Gerotor Motor Works   A gerotor motor is an internal gear motor that has an inner drive gear and an outer driven gear that has one more tooth than the inner gear. The inner gear is supported to a shaft which is connected to a load. The imbalance in a gerotor motor is…

    Read more
  • Linde Excavator HPR100-01-R Pump Repair
    Linde Excavator HPR100-01-R Pump Repair
    Comments Off on Linde Excavator HPR100-01-R Pump Repair

    Linde Excavator Hydraulic/Hydrostatic Main Pump REPAIR AND RETURN OF Linde HPR100-01-R Pump Repaired E-HPR100-01-R Repaired And Serviced Shipping Weight 135lb Must Give up to 21 days  for repair and service Hydrostatic Transmission Service, LLC remanufactures your Linde Hydrostatic pump back to OEM specifications using Linde parts, each Linde Hydrostatic pump is calibrated and tested, to like…

    Read more
  • Sundstrand Sauer Danfoss Series 40 M46 Brass Bearing Ring
    Sundstrand Sauer Danfoss Series 40 M46 Brass Bearing Ring
    Comments Off on Sundstrand Sauer Danfoss Series 40 M46 Brass Bearing Ring

    Sundstrand Sauer Danfoss Series 40 Brass Bearing Ring   Service Bulletin SB-9109 The of the that came about for the brass ring was that it used to be glass filled nylon material on the M46 servo pistons. The brass gives the job at hand longer life and sturdier work performance. They work the same way,…

    Read more
  • John Deere 755B Crawler Park Brake Pedal Linkage and Valve Cable
    John Deere 755B Crawler Park Brake Pedal Linkage and Valve Cable
    Comments Off on John Deere 755B Crawler Park Brake Pedal Linkage and Valve Cable

    John Deere 755B Crawler Park Brake Pedal Linkage and Valve Cable   To remove and install the pedal linkage: Take off the handle (A) and the nut (B) from the lock rod (C). The park brake pedal and support is taken out next. You will need to disassemble part (D-I) from the support (J). If…

    Read more
  • Hydraulic Pumps and Motors have Different Types of Pressure Limits
    Hydraulic Pumps and Motors have Different Types of Pressure Limits
    Comments Off on Hydraulic Pumps and Motors have Different Types of Pressure Limits

    Hydraulic Pumps and Motors have Different Types of Pressure Limits   Pressure Limits: 1) Closed Loop Circuit- The highest pressure in the closed loop circuit is bridled by a high pressure relief valve to a valve that is not greater than 5000 PSI. The gauge pressure will read 150 PSI higher that the relief valve…

    Read more
  • Railroad Hydraulic Equipment Parts
    Railroad Hydraulic Equipment Parts
    Comments Off on Railroad Hydraulic Equipment Parts

    HYDROSTATIC TRANSMISSION SERVICE,LLC . OFFERS HYDROSTATIC TRANSMISSION PUMPS, MOTORS, DRIVES,AND EQUIPMENT FOR THE FOLLOWING RAILROAD EQUIPMENT ACF Industries, Incorporated Alco Locomotives AlstomBombardier Transportation Brush TractionGE Transportation SystemsGIA industri ab Gunderson Inc. Railcars FreightCar America Rail Mover Rail Power Severn Lamb Talgo America Trinity Industries, Inc Windhoff GmbH Zephir S.p.A HYDROSTATIC PUMPS,MOTORS,TRANSMISSIONS, DRIVES AND EQUIPMENT FOR…

    Read more

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top