Eaton MDC With Neutral Detent on a 76 Series Unit

Eaton MDC With Neutral Detent on a 76 Series Unit

Eaton MDC With Neutral Detent on a 76 Series Unit

Comments Off on Eaton MDC With Neutral Detent on a 76 Series Unit

Eaton MDC With Neutral Detent on a 76 Series Unit

When the transmission is in neutral, it will give you a sense of positive centered feeling to the handle on the mdc valve letting the operator know it is in position. This detent lets the operator know where it is and makes sure the pump control valve is in a positive neutral position.

The detent is a spring biased ball plunger that sets down in a recessed control linkage at the neutral site. And it is adjustable. It will let you the operator the choice of how much neutral feel to put on in a range amount of 3-21 lb-in of control of shaft torque.

The mdc with detent gives you the wide bank neutral control spool.

If you need further help with the MDC, give us a call at 800-361-0068

sales@hydrostatic-transmission.com

 

 

About the author:

Quick Links

  Home
  Services
  About
  Blog
  Store
  Contact

Social Links

Contact Information

  Address:
    1644 Eason Blvd
    Tupelo, MS 38801
  Toll Free: (800) 361-0068
  Local: +1 (662) 680-8899
  Email: info@hydrostatic-transmission.com

Back to Top