Denison Goldcup Series M11- M14 Housing Assembly

Place the face plate pins (1) in the holes that are in the barrel face.

Put a heavy amount of lubrication on the surface of the barrel and put the face plate (2) over the face plate pins.  Need to make sure the face plate is on the barrel really good  with the steel side towards the barrel.

The gaskets go over the 4 locating sleeves in the mounting flange.

Put the housing assembly over the barrel and auxiliary shaft assembly. Guide the override tubes and pressure feed tubes thru the housing assy. Put the pressure feed tubes in the slots in the housing face.

Need further instructions on this assembly, call us at 800-361-0068

sales@hydrostatic-transmission.com